GPP:n pollarit

Sertifioitua turvaa rakennuksille, alueille ja julkisille tiloille

Pollarin perusrakenne on vuosisatoja vanha. Suojaelementtinä se on melkein aina sylinterimäisessä muodossa, joka koostuu eri korkeuksilla ja halkaisijoilla olevista teräsputkista. GPP Perimeter Protectionin tutkimus- ja kehitystiimi on suunnitellut uuden version pollarista tarjotakseen entistä paremman ja räätälöidymmän ratkaisun alueensi ja vaatimuksistasi riippuen. Luotettava suojaus, tyylikäs muotoilu ja liikenteen ohjaustoiminto yhdistyvät saumattomasti. Samalla jopa korkean turvallisuuden alueille sertifioidut tuotteemme mahdollistavat ohikulkijoiden häiriöttömän liikkumisen. Kun uhkaa ei ole näkyvissä, liikuvat pollarimme voidaan vetää kokonaan maan alle, jolloin myös ajoneuvot voivat kulkea esteettömästi.

CityProtector M40/M50

Kiinteä pollari M30/M50

Kiinteä pollari P80

Hydrauliset pollarit M30/M50

Resilience SSF 100

CleanSafe pollarit

Kaikki pollarit eivät ole samanlaisia

Yksittäistä pollaria koskevassa päätöksessä on aina otettava huomioon ympäristö, yleiset olosuhteet ja asiakkaan turvallisuustarpeet.  GPP:n jokaisen pollarin laatuun samoin kuin yrityksemme asiantuntemukseen ja palveluun voidaan aina luottaa. GPP:n avulla valittavana on mekaanisten tai sähköisten pollarien, kiinteiden tai liikkuvien pollarien välillä.  Voidaan valita raskaan liikenteen käyttöön tarkoitettujen RAL-värien tai tietyn ajotien tyyliin sopiva värimaailman. Valinnainen valaistus voi parantaa näkyvyyttä tai parantaa jalankulkualueen tunnelmaa kaupungin sisällä. Vertailtavana ovat pyöreistä tolpista valmistetut pollarit versus CityProtector-pollarijärjestelmämme, jossa yksittäiset elementit on motoiltu hain hampaiden mallin mukaan.

Olemme kehittäneet jokaisen yksittäisen pollarimallin soveltuvan tiettyyn tarkoitukseen , jotta voimme tarjota asiakkaillemme oikean tuotteen jokaiseen tilanteeseen. Joka tapauksessa voit luottaa todistettuun GPP-laatuun ja älykkääseen muotoiluun: pollarimme matalalla asennussyvyys ja perustuksen madaltaminen on ylpeytemme. Tämä vähentää kustannuksia ja mahdollistaa integroinnin jopa monimutkaisiin arkkitehtuurikonsepteihin. Kaikilla GPP-pollareilla on pitkä käyttöikä ja ne vaativat vain vähän huoltoa. Itsenäisten hydrauliikkayksiköiden vuoksi liikkuvien pollareittemme vikaantumisaste on erittäin alhainen.

Kysy meiltä lisää teknisistä yksityiskohdista tai neuvoja pollariemme parhaasta mahdollisesta integroinnista omaan turvallisuuskonseptiisi.

CityProtector M40 – Your high-security bollard

Your high-security bollard

PPG’s CityProtector systems are both removable and fixed. No other available product is more deserving of this product designation. As tests confirm, the CityProtector M40 survives the impact even of heavy vehicles almost undamaged – while the vehicle, in turn, is completely destroyed.

Low penetration distance and the simple installation despite utmost robustness are unique in the world of high-security products.

CityProtector M50 – Unforgiving Protection for People & Assets

Unforgiving Protection for People & Assets

The M50 is similar in design to the M40 bollard – just tougher. Even heavy trucks stand no chance against this massive high security bollard. At speeds of up to 80 km/h a breakthrough into a sensitive area is impossible with the CityProtector M50.

Our CityProtectors can be installed and supplemented in such a way that they do not disturb the cityscape aesthetically, offer versatile additional functions and, for the most part, do not stand out as a security product at all. As benches, tables, bases for streetlamps or elements for bicycle racks, they blend seamlessly into the design of the urban environment.

CityProtector M40/M50

Blocking width
100 mm
Blocking height
900 mm
Certi­­fication
PAS 68:2013 V/7500[N2]/64/90:0.3/15.7
IWA 14-1:2013 V/7200[N2A]/64/90:0.7
IWA 14-1:2013 V/7200[N2A]/80/90:4.3
Instal­lation depth
 220 mm (shallow foundation) – 100 mm lowered foundation optional
Foundation
3,900 x 1,750 mm (triple unit)
Options
Different blocking element designs, stainless steel sleeves and street furniture options available, also see technical datasheet online


Rigidity for Highest Security

PPG’s M30 and M50 fixed bollards protect people on public paths, sidewalks and squares from being endangered by vehicles. Due to their low foundation depth, they can be used in inner cities, where supply lines and structures such as underground car parks are often a challenge. Buildings and areas can also be reliably protected with this product. Depending on the anticipated threat scenarios, you may choose either the M30 bollard or the crash-tested model M50. Installation is quite simple, which is why these bollards can also be set up in the short term – for example, as a retrofit solution and to further reinforce existing security measures if the threat level has increased.

Fixed Bollard M50

Diameter
355 mm
Blocking height
1,100 mm
Certification
PAS 68:2013 V/7500[N3]/80/90:0.4/15.4
IWA 14-1:2013 V/7200[N3C]/80/90:0.8
ASTM F2656-07 M50/P1 (triple unit)
Installation depth
 500 mm incl. 100 mm road covering
Options
Stainless steel sleeve, top lighting, also see technical datasheet online

Fixed Bollard M30

Blocking width
355 mm
Blocking height
1,000 – 1,100 mm
Certification
Vehicle Impact Simulation M30/P1 (triple unit)
Installation depth
 500 mm incl. 100 mm road covering
Options
Stainless steel sleeve, top lighting, also see technical datasheet online

Fixed Bollard P80 SF

Diameter
273 mm
Blocking height
1,080 mm
Certification
PAS 68:2010 V/7500[N3]/80/90:10.6/11.1
Installation depth
 750 mm
Options
Top lighting, also see technical datasheet online

Crash Protection whenever required

The movable bollards M30 and M50 clear the way for authorised vehicles when lowered. In raised position they protect sidewalks, squares and other areas from intrusion by even the largest and heaviest types of vehicles. Both models are low-maintenance and crash-tested.

Movable Bollard M30

Diameter
355 mm
Blocking height
1,100 mm
Certi­­­­fication
PAS 68 V/7500[N2]/48/90:0.0/0.0
IWA 14-1 V/7200[N2A]/48/90:0.4
Operating time
 Raising: approx. 5-6 sec., lowering: approx. 3-4 sec.
EFO (optional)
approx. 2-3 sec.
Drive unit
Mounted to installation frame
Insta­llation depth
 500 mm – 1,800 mm incl. 100 mm road covering
Options
Stainless steel sleeve, top lighting, EFO + RO1, also see technical datasheet online

Movable Bollard M50

Diameter
355 mm
Blocking height
1,000 mm
Certi­­­­fication
 ASTM F 2656-07 M50/P2
PAS 68 V/7500[N3]/80/90:5.2/7.8
IWA 14-1 V/7200[N3C]/80/90:5.5
Operating time
 Raising: approx. 5-6 sec., lowering: approx. 3-4 sec.
EFO (optional)
approx. 2-3 sec.
Drive unit
Integrated in blocking element
Insta­llation depth
 500 mm – 1,850 mm incl. 100 mm road covering
Options
Stainless steel sleeve, top lighting, EFO + RO1, also see technical datasheet online

Any Ground is Safe Ground

The foundation plate of the SSF100 Resilience bollard is characterised by the shallowest installation depth of all our bollards. At the same time, this product easily passed a crash test with a truck travelling at 64 kph successfully and is certified according to IWA 14-1. This bollard ensures reliable protection against approaching vehicles on various types of surfaces such as concrete, asphalt, gravel or block pavement.

The SSF100 bollard can be aesthetically modified and customised in many ways. Various reflective foils, finishes or even stainless steel sleeves can be added depending on the area of application and architectural surroundings. The product is available as a permanently mounted or removable version.

SSF100 Resilience

Diameter
273 mm
Blocking height
1,000 mm
Certi­­­fication
IWA 14-1:2013 V/7200[N2A]/64/90:4.9 (triple unit)
Insta­llation depth
 200 mm incl. 100 mm road covering
Options
See technical datasheet online

Protection for Public Spaces

The rigid CleanSafe bollard is the optimal addition to our high-security bollard portfolio. Visually elegant and robust like our other steel bollards, it has a particularly ingenious feature. To protect not only against mechanical impact but also against the risk of infection, we have equipped it with an integrated disinfectant dispenser. This vandal-proof hygiene solution, which is built into the blocking element, is particularly well-suited to areas such as city centres, where large numbers of people congregate and safe interaction is essential.

The dispenser, which is placed directly at the height of an average-sized adult’s hands, can be operated contactless or by touch. Our high security bollards are usually positioned at central traffic points in cities, making them highly visible, so that anyone who wants to spend a nice day in the city centre can reliably protect themselves from infection. When equipped with the optional LED lighting, passers-by and road users are directly made aware of the bollard even in poor lighting conditions.

CleanSafe

Diameter
273 mm
Blocking height
1,080 mm
Certi­­­­fication
Construction based on crash test certified fixed bollard P80
Insta­llation depth
 Min. 450 mm
Options
Top lighting, also see technical datasheet online
Control unit
Multifunctional, automatic control WE-Tronic II with integrated frequency converter
Interlocking
Via drive mechanism supported by interlocking of gate leaves through reception fork and in-feed roller
Certification
TÜV type-tested according to DIN EN 13241-1
Options
See technical datasheet online

Lataa GPP-tuotekatsaus

Navigointi

Etusivu                 Palvelu

Tuotteet               Meistä

Ratkaisut             Ota yhteyttä

Ota Yhteyttä

info@perimeterprotection.fi

+358 (0) 10 617 1700

© Copyright - GPP Perimeter Protection OY 2024